HOME

RESEARCH

PRODUCTS

ABOUT US

CONTACT US

SERVICE

 

  LIQUID NITROGEN PLANTS

 

 

LNP PRODUCT LISTING

 

 

 

 

Features of Liquid Nitrogen Plants                                               

  • Produces Liquid Nitrogen directly from the air using advanced membrane technology
  • Operates 24 hours a day, 7 days a week reliably, automatically and safely
  • Installation and start up in less than two (2) hours
  • Less expensive than the competition
  • Air cooled up to 100°F (38°C); Water cooled systems are also available
  • Automatically enters into standby mode when the production dewar is full
  • Liquid level observable at all times
  • Designed with a storage capacity for 3 days production
  • Rugged, stainless steel  Liquid Nitrogen dewar
  • Cryogenically insulated extraction line and valve for low loss  Liquid Nitrogen transfer
  • Do it yourself-easy maintenance
  • Tools, spare parts and manual included
  • With the air compressor, all you need is electricity to produce  Liquid Nitrogen
Cryomech Liquid Nitrogen Plant's have operated reliably at some of the most demanding sites possible on earth. It will work in yours.

Cryomech, Inc. manufactures reliable, fully automatic 10, 20, 40 & 60 liter per day Liquid Nitrogen Plants (LNP's). A nitrogen generator separates nitrogen from the other components of the air, without any moving parts. The Liquid Nitrogen Plants  require only electrical power and compressed air to produce  Liquid Nitrogen.

The 98% pure nitrogen flows into a 35-210 liter dewar, where it is liquefied at the cold end of either our AL60-300 Cryorefrigerator. The liquid level in the dewar is automatically controlled and observable at all times to the operator. The  Liquid Nitrogen is easily transferred from the dewar using the low loss, vacuum insulated extraction valve and line conveniently located on the dewar. The Liquid Nitrogen Plants have been designed for ease of operation and do not require a full-time, trained operator.

Cryomech, Inc. extends a warranty on all parts and workmanship for three years or 8,000 hours, whichever comes first, after satisfactory installation, provided the owner (operator) operates the equipment according to the specifications and operating procedures set forth by Cryomech.

    

 Other Links of    Interest:

 


HOME RESEARCH PRODUCTS ABOUT US CONTACT US SERVICE

Questions or problems regarding this web site should be directed to Cryomech, Inc.

Cryomech, Inc.  113 Falso Drive, Syracuse, New York USA 13211   Phone: 1-315-455-2555   Fax: 1-315-455-2544    Email: Cryomech, Inc.  

Last modified: 10/09/07.